ACCESORIO ASPIRADORES EUFY 19 EUFY 11S 30 30C EN ESPAÑA

Compatible for Eufy RoboVac 11S, RoboVac 30, RoboVac 30C, RoboVac 15C, RoboVac 12, RoboVac 35CExtend the service life of the vacuum cleaner and work the same as the old vacuum cleaner.Replace the consumable supplementary kit every 2 to 3 months to keep your RoboVac running at its best performance.How to replace the filter:1. Press the release button on the dust collector and pull it out.2. Open the filter door and take out the old filter.3. Install the new filter unit and close the filter door. (Make sure the black sponge filter at the bottom)4. Insert it into the dust collector to lock it in place.How to replace the side brush:1. Turn the RoboVac over and use the side brush.2. Remove the old side brush with both hands.3. Pull the bristles hard to remove.4. Press down on the new side brush to snap it into place.How to replace the roller brush:1. Push the pull ring to remove the brush.2. Firmly grasp the old roller brush and lift it to remove it.3. Align the end label of the new rolling brush with the slot correctly.4. Replace the brush cover and push it into place.Vacuum Part Type: BrushesType: Vacuum Cleaner Partscolour:Blue+whiteMaterial:plasticPackage Contents:1 x main brush8 x side brush8 x HEPA filter1 x blue cleaning brush1 x black screwdriverOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. It is not the original spare part, but compatible with it.